Low-Volume CNC Machining Services

NAITE TECH machines custom metal and engineering plastic parts to your drawings for pilot runs, bridge production, and repeat orders. Our engineers review your critical dimensions, finish, and inspection requirements to prepare your quote and estimate production lead time.
Send one drawing to compare unit pricing at multiple quantities.
In-House CNC Machining · Inspection to Your Specifications
All your designs are secure and confidential
Flexible Batch Sizes

Typical batches range from 10 to 1,000 parts. Smaller orders are welcome.
​​​​​​​
Fast Batch Quotes

We typically quote within 24 hours of receiving a complete RFQ.
First-Piece Review

Request measurements of critical dimensions on the first piece before the full batch runs.
Repeat-Order Review

We confirm your part number and drawing revision before each repeat batch.

Small-Batch CNC Machining Capabilities

NAITE TECH machines small batches of custom metal and plastic parts in-house, using your CAD models and drawings.
 
Typical Batch Size
10–1,000 pcs
Pilot Runs
Use an initial batch to verify assembly fit, function, and critical dimensions before committing to a larger order.
Bridge Production
Cover short-term demand while production tooling is being built or regular production ramps up.
Repeat Batches
Reorder by part number and drawing revision. Include the quantity and target delivery date for each batch.
Technical Specifications
CNC Process   Typical Parts   Reference Part Size Common Materials & Finishes
3- & 4-Axis CNC Milling   Housings, brackets, and mounting plates   Aluminum parts up to 1,000 × 500 × 500 mm Aluminum, stainless steel, and engineering plastics. Anodizing for aluminum.
CNC Turning & Mill-Turn   Shafts, bushings, and parts with cross holes   Turning diameter ≤300 mm, length ≤500 mm. Mill-turn sizes by review. Stainless steel, alloy steel, and brass. Passivation for stainless steel.
5-Axis CNC Machining   Multi-sided housings, contoured parts, and angled features   Up to 800 × 500 × 450 mm, depending on setup Aluminum, stainless steel, and titanium. Finish per drawing.
Swiss CNC Machining   Pins, miniature shafts, and small connectors   Ø1–32 mm diameter. Typical machining length up to 300 mm. Stainless steel, brass, and aluminum. As-machined or finish per drawing.

We confirm part size based on geometry, material, and workholding.

Tolerances & GD&T
Mark critical fits, datums, and GD&T requirements on your drawing. Specify dimensions that apply after finishing. We confirm achievable tolerances and inspection scope with your quote.

Quality Control for Repeatable CNC Batches

NAITE TECH plans inspection around your approved drawing and acceptance criteria. Before production, we agree on the features to measure, the inspection frequency, and the records to provide.
First-Piece Check
We check the first machined part against the approved drawing, focusing on critical dimensions and fit features before releasing the setup for the rest of the batch.
 
In-Process Inspection
We measure selected features during machining to detect dimensional drift. The inspection frequency depends on the part, its tolerances, and the agreed inspection plan.
 
Final Inspection & Reports
Before shipment, we check finished parts against the agreed dimensional and visual criteria. This includes features specified for measurement after surface finishing.
 
Repeat-Order Review
Before a repeat run, we confirm the part number and drawing revision, along with any changes to material, finish, or inspection requirements.
Inspection Documentation
Dimensional inspection reports, CMM inspection reports, and formal FAI reports are available as agreed at quotation. Specify any 100% inspection requirements or customer-specific report formats in your RFQ.
gaming aluminum block cnc machining
6061-T6 Aluminum Blocks for Gaming Equipment
We CNC-milled a medium batch of structural blocks for a gaming equipment manufacturer in the Czech Republic. Assembly fit and consistent anodized color were key requirements.

Finish: Sandblasting and custom-color anodizing

Inspection: First Article Inspection (FAI), in-process dimensional checks, and final visual and dimensional inspection

Project Result: Met the project’s ±0.01 mm tolerance and achieved a uniform anodized finish

Small-Batch CNC Pricing and Lead Times

Compare batch quantities using the same drawing revision, material, finish, and inspection requirements.
Submit CAD & Drawings
Engineering Review & Quote
 
Machining & Inspection
Shipment
Quantity-Based Quotes
A larger batch can spread programming and setup costs across more parts. Request a quote at several quantities to compare the unit price and total cost of each batch.
Example Quote Quantities
25 pcs 100 pcs 250 pcs
Pricing
Unit price and batch total for each quantity
Setup and tooling
Applicable setup fees and any one-time programming or fixture charges
Included work
Finishing, inspection, and reporting specified in the quote
DFM Review for Small Batches
Our design for manufacturability (DFM) review flags features that may affect machining cost, assembly fit, or lead time.
 
Tool access
Deep pockets, small internal corner radii, and features that may require additional setups
Critical tolerances
Mating surfaces, hole positions, and other features that need tighter control
Finishing allowance
The effect of anodizing or plating on threads, bores, and mating surfaces
 
Typical Production Lead Time
3–10
business days
Production Lead Times and Delivery
Production timing depends on material availability, part complexity, finishing, inspection, and any required first-piece approval. We confirm the estimated production schedule and shipping transit time at quotation.

For split deliveries, include the quantity, destination, and target arrival date for each shipment.

Get a Quote for Your CNC Batch

Send your CAD model or drawing and target quantities. We’ll review the machining, inspection, and delivery requirements for your batch.
 
Multiple Part Numbers
In Project Details, list the part number, drawing revision, and target quantity for each part.
Repeat Orders
Include your previous order number and note any changes to the drawing or delivery schedule.

Fields marked * are required.

Enter one quantity or separate multiple quantities with commas.

Accepted formats are STEP (.step or .stp) and PDF.

Include material, finish, critical tolerances, any first-piece approval or inspection report requirements, your target arrival date, and shipping destination.

CNC Prototyping FAQs

  • What quantities can you quote for low-volume CNC machining?

    Typical batches range from 10 to 1,000 parts. We can also quote single pieces and review larger orders based on the drawing, material, and delivery schedule.

  • Can I get pricing for multiple quantities from the same drawing?

    Yes. Send the same drawing revision and the quantities you want to compare, such as 25, 100, and 250 pieces. Use the same material, finish, and inspection requirements to compare unit prices and batch totals on the same basis.

  • Can I start a pilot batch directly from my engineering drawings?

    Yes. Send the latest approved engineering drawing with material, finish, and critical tolerances. A matching STEP model helps define complex geometry. We review the files for manufacturability and confirm any open requirements before the pilot batch starts.

  • Can I approve a first article before you machine the full batch?

    Yes. Request first-article approval in your RFQ. Before you place the order, we agree on the inspection scope, whether you need a physical sample, a report, or both, and when your approval is required to release the remaining batch.

  • What inspection reports can I request for my batch?

    You can request a dimensional inspection report, a CMM measurement report, or a formal First Article Inspection (FAI) report. Specify the critical features, sampling requirements, and any report template in your RFQ so we can confirm the inspection scope in your quote.

  • What affects the lead time for a small CNC batch?

    Small CNC batches typically take 3–10 business days to produce. Material availability, part complexity, finishing, inspection, and any first-article approval can affect that estimate. We confirm the production schedule and estimated shipping transit time at quotation.

  • Can you quote multiple part numbers in one request?

    Yes. Include a line for each part number with its drawing revision and target quantities. Match the filenames to the part numbers and list any differences in material, finish, or inspection requirements by part.

  • How do you handle repeat orders and drawing revisions?

    Include the previous order number and the latest drawing revision for each part. We review any changes to geometry, material, finish, or inspection requirements before confirming pricing and lead time for the new batch.

  • Can I request delivery in multiple shipments?

    You can request split deliveries in your RFQ. List the quantity, destination, and target arrival date for each shipment so we can confirm the proposed schedule and freight costs at quotation.

  • Can I request an NDA before sending my drawings?

    Yes. Request a nondisclosure agreement (NDA) in the Project Details field and include your work email. We can review the agreement with you before you share CAD models or drawings.

If there are any CNC machining issues.
Please contact us.
Capabilities
Service
Support
COPYRIGHT © 2025 CHANGZHOU NAITE METAL TECHNOLOGY CO., LTD. ALL RIGHTS RESERVED.